NOXYDE®Ultimate corrosion protection, even in severe conditions200% elastic coat does not crack or peelExcellent coverage of nuts, bolts and weldsDry fall: saves preparation & clean up timePrimer and topcoat in oneUV- and impact-resistantSingle pack water-based elastomeric coating based on a modified acrylic binder with unequaled corrosion protection, >15 years in the highest corrosion class C5-M, according to ISO 12944.Application type:Airless SpraygunSubstrate:Metal, Metal Cladding, Roof Substrate Metal:Aluminium, Bare or blasted metal, Galvanised steel, Non-ferro metal, Prepainted metal, Rusted metal, Stainless Steel Substrate Metal Cladding:Bare or blasted metal, Galvanised Steel, Pre-painted, Rusted Metal, Weathered PlastisolSubstrate Roof:Metal Roof, Pre-paintedTouch dry:1,5 hoursDry to recoat:24 hoursVOC level:15 g/lPRACTICAL CONSUMPTIONPractical coverage depends on many factors such as porosity and roughness of the substrateand material losses during application.SURFACE PREPARATIONRemove grease, oil and all other surface contaminations by alkaline or high pressure (steam)cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has tobe dust free and made rust free by means of sandblasting (Sa2, St2) or high pressurewaterjetting (min. 600 Bars). After jetting, the substrate has to be dust free. On newgalvanisedsurfaces, newzinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferroussubstrates, apply Noxyde in red or grey as the first coat. In all instances apply contrastingNoxyde colours for subsequent layers.DIRECTIONS FOR USETo ensure homogeneity, coating materials should be thoroughly stirred prior to use.APPLICATION CONDITIONSTemperature between 8 and 55°C / Air humidity max. 80% R.H.The substrate temperature must be at least 5°C above dewpoint.APPLICATION & THINNING: BRUSHUndiluted as a rust preventive paint.Diluted with approximately 25% volumewater as an adhesion primer (consumption about100 g/m²).